Phone Repair Tool Kit Breakdown

iPhone Tool Kit

  • Pry Tool- Used for opening retainer clips and also removing flex cables in the absence of an x-acto knife
  • Pick- Used for separating LCD from the frame and can also be used for glass separations
  • Phillips Driver- Used for removing all screws inside of the iPhone.
  • Pentalobe Screwdriver- Used for removing retainer screws from the bottom of the iPhone. These screws are located on each side of the charging port
  • Suction Cup- Placed on screen to create leverage to pull LCD assembly from frame.

Universal Tool Kit with Adhesive

  • Pry Tool- Used for opening retainer clips (many flex cables are held down by retainer clips to prevent damage)
  • Pick- Used for separating glass or the LCD from the frame
  • T5 Torx Screwdriver- Used for screws .055 inches in diameter. Also referred to as Star Bits due to the star pattern of the screw itself
  • T6 Torx Screwdriver- Used for screws .066 inches in diameter
  • NOTE: When using Torx drivers, if you are unsure of the size start with the smaller of the drivers first to ensure you do not strip the screws
  • Phillips Driver- Used for all screws with cross patterns.
  • Adhesive- Used on the underside of the glass to hold to the LCD and frame. Very effective if strategically placed.