Home > Parts > Apple > iPad > iPad 3 >

iPad 3 Screen Replacement Touch Digitizer - Black
Replacement Glass Touch Screen Digitizer for Apple iPad 3 - Black

Alternative Views:

Price: $17.99
Ships Today! Order by 7 PM ET

Availability: In Stock
SKU: GPI20803

iPad Tool Kit & Adhesive [$9.97] Recommended

Rush Processing [$3.99]

Tempered Glass Screen Protector [$13.98]

30 Pin Wall Charger & Cable [$9.98]



Description Shipping & Returns Buy with Confidence

iPad 3 Screen Replacement Touch Digitizer - Black

Compatible with iPad 3

  • Replace your broken screen yourself and save
  • High strength optically clear glass lens and touch digitizer
  • Fixes cracked, scratched or unresponsive touch screens
  • In Stock Items Ship Same Day
  • Lowest cost option for screen repair
  • 1-2 hours to install
  • Free Warranty - 100% guaranteed parts
  • Trusted Seller - U.S. owned, 10 years in business
  • Don't be scammed by low quality products and unreliable sellers
  • Buy today and get your device back!

Note: If you have dead pixels, discolored spots, or doesn't light up then a complete LCD assembly is required. Full LCD replacement is the easiest screen repair.

Select the tool kit option - Get everything you need
  • Highest Quality Screen Digitizer
  • Tailored Tool Kit - proprietary screwdrivers, picks, wedge
  • Special Double-Sided Adhesive for new glass
  • Access to instructions, tips, and videos
Compatible Models - Identify your device
A1403 | A1416 | A1430

Installation Instructions

The specific repair for your device may vary. A typical glass repair can be completed with the following steps. We suggest viewing a repair video on YouTube prior to installation.

  • Apply a strip of clear packing tape across the cracked screen
  • Use the heat source to slowly heat up the surface of your screen to loosen the adhesive
  • Apply the suction cup to the glass
  • With the wedge tool start to separate the glass from the device
  • Insert the picks as you go to keep the screen separated
  • Work your way around the device, separating the bottom of the device last
  • Once the glass is separated, carefully disconnect digitizer flex cable
  • Once the glass is removed wipe off LCD
  • Apply adhesive to replacement screen
  • Reconnect digitizer flex cable
  • Adhere screen to phone


This repair requires precision and patience. RepairPartsPlus is not responsible for any damage to devices during installation.

Related Items
 30 Pin Wall Charger for iPad 1st, 2nd, 3rd Gen, iPhone 3GS, 4, 4S Screen Repair Tool Kit + Adhesive Tape - iPhone Replacement 11560 mAh Battery for iPad 3
Price: $14.98

Price: $11.98

Price: $27.98

30 Pin Wall Charger for Devices Screen Repair Tool Set with Adhesive - iPhone Replacement 11560 mAh Battery Pack for Apple iPad 3

Customer Rating: 4.5 of 5 Total Reviews: 3 Write a review »

ipad 3 digitizer July 1, 2016
Reviewer: Jim M. from Alamogordo, NM United States  
Item was exactly as described and fit amazing. Shipping
was outstanding, arrived in two days. will definitely use
Repair Parts Plus again. With 6 iPads in the house, one is
always getting repaired.

Thanks again,
Jim M.

Was this review helpful?

Replacement screen May 31, 2016
Reviewer: Dean Prince from Goodlettsville, TN United States  
All good.  parts, quality and speedy delivery.  Would have given 5 stars if there was a small instruction sheet for sticker placement.  Also, when heating up the glass to remove you might want some gloves beside latex ones because the ipad will be hot to the touch. [Customer Support: Thank you for the feedback and happy to hear your repair was a success!  We do provide online instructions under Guide.  The Screen Instructions includes tips for using the adhesive as well as a link to a YouTube video.]

Was this review helpful?

Fast delivery, very affordable DIY May 9, 2016
Reviewer: Brian K from PA United States  
My iPad3 is like new for under $35. The repair took me about 1 hr 30 min. I could probably do it again in half the time. HIGHLY recommend Repair Parts Plus!

Was this review helpful?